
Avalanche safety equipment for skiing and snowshoeing
Avalanche transceiver
- A signal is only generated if both the buried and the searching person have a functioning and switched on avalanche transceiver with them.
- Don’t forget to make a device check before starting. During this check, you will alternately set your devices to receiving mode and check if you can locate your partner. Also, remember to have charged batteries.
- The device must be in transmitting mode for the entire route. You only switch to receiving mode when you are searching for a buried person. Note that you can’t be located by others anymore.
- The device should always be worn directly on the body, not in a backpack. This could be lost in an accident.
Probe
Probes usually consist of several elements that can be quickly joined together by a pulling system. They are about 2.40 m long and have a printed guidance system to read the depth at which the buried subject is located.
A probe is also helpful in other areas, by the way. For example, you can use it to check risky slope areas for snowy obstacles during freeriding (e.g. in the landing zone after kickers).
Fénykép: Ortovox Safety Academy
Shovel
Avalanche shovels are made of an ultra-light but robust material such as aluminum or carbon. They are also foldable or can be disassembled into individual parts so that they can be optimally stowed in a backpack.
Avalanche airbag
The airbag backpack works like this: In a mixture of parts of different sizes, the larger parts always float upwards. An inflated airbag significantly increases the volume of the athlete and he or she has a better chance of staying on the surface of the avalanche or being only slightly buried.
